|
Welcome to our Woodworking Products Information page
Authorized Distributor
Mohawk Finishing ProductsTM
"The Original Touch-Up Company"
Please click on the images to download and print any information you need.
|
 |
| Quick Fill Color Guide |
|
|
 |
| Mohawk Perfect Blend |
|
|
|
|
 |
| High Solids Pre-Catalyzed Clear |
|
|
 |
| Blender Flow-Out™ Product Improvement |
|
|
Procedure to use the Quick FillTM Burn-In
We want to share with you, tips on how to use the Mohawk Quick FillTM Burn-In Sticks by filling, leveling and how to retain sheen.
Materials needed:
M900-3215 Mini Heat Gun
M320-3600 Quick FillT Burn-In Sticks
H898-0002 Leveler Card
M280-1200 UltraT Mark 12 pack
M107-0190 Wax WashT Aerosol
M902-3000 Rubber Sanding Block
M904-1001 Trace Cloth
M265-0501 UltraT Fine Graining Pen - Black
M265-0401 UltraT Fine Graining Pen - Dark Brown
M265-0301 UltraT Fine Graining Pen - Medium Brown
M265-0101 UltraT Fine Graining Pen - Light Oak
M102-0416 Pre-Catalyzed Clear Aerosol - Matte
|
|
 |
| Quick Fill™ Burn-In Stick |
|
|
 |
| Use a knife or the Leveler Card to scrape off the unseen fibers that stick out from the edge of the scratch. |
|
|
 |
| Carefully choose the UltraT Mark Marker that matches the background (lightest) color of the funiture (too light is better than too dark). color the raw wood (the scratch) and quickly wipe off any excess around the scratch. |
|
|
 |
| Choose the proper colored Quick FillT Burn-In Stick and use the Mini Heat Gun to begin to melt one end of the stick. |
|
|
 |
| As soon as the stick begins to puddle, but not drip, rub the melted end across the scratch until it is completely filled. |
|
|
 |
| Using the Leveler Card wipe off (don't scrape) the extra material beginning at a low angle and moving the card to the vertical position to get more off with each wipe. |
|
|
 |
| If there are grain lines (dark lines) that need to be added use the proper sheen of lacquer aerosol (M102-0416; Matte Pre-Catalyzed lacquer, for instance) and spray lightly two times while moving the can briskly to avoid puddling. |
|
|
After waiting for two or three minutes (or much longer if you applied too much) you will be able to use the proper color of Ultra Fine Graining Pen (very lightly) to connect the grain lines from one side of the scratch to the other side of the scratch. Be careful using the graining pens because you cannot wipe them off with your finger. You can soften the darkness but cannot remove the new lines.
There will be a shiny area surrounding the filled area. This must be removed but must remain flat. Wrap a piece of trace cloth tightly around the rubber sanding block and spray a small amount of Wax WashT Remover onto the cloth which is now very flat against the block.
Wipe the extra Quick FillT Burn-In Stick off and the sheen should be gone. If there is a little sheen remaining repeat the Wax WashT Remover spray onto the cloth and wipe again.
If the repair looks good..stop!
By using this procedure, you should have a professional repair every time using Mohawk Finishing Products.
|
Waterborne Finishing System Introduction:
Mohawk Finishing Products has recently announced the availability of a new waterborne finishing system. The system includes pre-catalyzed lacquer, conversion varnish, dye stains, pigmented wiping stains, glazes, bases and colorants. This entire system is GREENGUARD Certified and suitable for LEED® credits. GREENGUARD Certification can be viewed at www.greenguard.org. This is a complete waterborne program that passes all KCMA testing standards with as little as two coats.
|
 |
| Mohawk Stains & Glazes |
|
|
|
|
Interactive Training DVD's
Mohawk Finishing has developed a series of instructional DVD's to share our expertise in furniture touch up and repair techniques. From fixing gouges and nicks in an antique piece of furniture to finding the right wood repair and finishing products for your unique business, our DVD's touch on a variety of touch up topics.
For more information and a video preview click the picture at the right.
| |
|
